The HORN -- or a ROADRUNNER

[White Ice]

White Ice here, by the way, that is the horn I was referring to that I had put on
our cube. (Nissan Sport Horn) I am still looking for a bug deflecter. Any help out there??

[BLCKNBLU]

YouTube - Nissan Cube with a truck horn

YouTube - Nissan Cube with a truck horn

[bigguy]

I like the Stebel Nautilus Compact Dual-Tone Air Horn, and if you like the European sounding horns, this is the top of the line and most (legal) decibels allowed by law. I have this on my scooter and plan to get it for my Cube as well.

[hk20000]

I made a video of the whole process of swapping the horn from popping the hood to getting deafened by it while working to shut the panels

YouTube - 2010 Nissan Cube Horn Replacement

YouTube - 2010 Nissan Cube Horn Replacement

only 7 minutes of your life you could have saved an old lady! My horn is a souvenir piece I got from Super Autobacs when I was in Japan years ago it comes in a pair like this:


Same brand but I forgot the model....Straight bolt on with brackets already attached to it straight out of the box....

the Nissan wiring will hook up to these without any modifications or crimping...As you can see in the video. So the Cube gets one and my Corolla gets one.

[bigguy]

Nice video! Thanks for the info! It'll keep me from breaking the panels

[davesecx]

Originally Posted by Steady

I was also wondering if anyone has installed the nissan accessory "sport" horn? Does it make an improvement on the wimpy sound issue?

I got the sports horn installed. While not anything like an airhorn, its a quality horn thats sounds like it should. I like it. The stock horn on a 2010 Cube is pretty pathetic. I think its one of the MUST BUY accessories for all Cube owners.

[Geo4K]

I replaced my single horn with dual tone Hellas – high and low. I think they are rated at 118 db. They saved my bacon, or rather, someone else’s twice. Another member posted about the trouble with the loud stereos drowning out the horns, well, you have the same trouble with very old deaf drivers too… I think it is a smart upgrade.

[6thG3@r]

Hello everyone. I am a new member to the site. The issue I am having is I purchased the Wolo Maxi Sound 320-2T horn set. I also purchased a fuse holder and fuse, extra wires, connectors, and relay.

My question is my relay has four posts (ground, horn, etc) so I am confused on how exactly to wire the horns up. I just placed one horn on the current stock wiring. I do not know if that is correct, but would like to have both horns working. How would I go about hooking up both horns.

If someone has experience with this type of horn and has images on how to do this correctly since the information that comes with the relay and horns does explain but is vague when presented with this type of car, it would be appreciated.

Thank you

[bigguy]

Originally Posted by 6thG3@r

Hello everyone. I am a new member to the site. The issue I am having is I purchased the Wolo Maxi Sound 320-2T horn set. I also purchased a fuse holder and fuse, extra wires, connectors, and relay.

My question is my relay has four posts (ground, horn, etc) so I am confused on how exactly to wire the horns up. I just placed one horn on the current stock wiring. I do not know if that is correct, but would like to have both horns working. How would I go about hooking up both horns.

If someone has experience with this type of horn and has images on how to do this correctly since the information that comes with the relay and horns does explain but is vague when presented with this type of car, it would be appreciated.

Thank you

The diagram that comes from Wolo explains how to install both horns:
http://www.wolo-mfg.com/320-2t%20english.pdf

Not quite sure why you need a relay or fuse.

-Rich

[6thG3@r]

Thanks. However I have that same diagram & figure 2 is what I am stumped with. Would I plug one of each connector into each horn as shown? I have a SL model that has one horn wire with two connectors.

The reason I purchased the relay and fuse holder & fuse was due to some sites saying you would need that since the stock horn wires couldn't handle the power of the horns.